Skip to Content
BLOG:

Thinking of Staining Your Hardwood Floors a Dark Color?

142 Comments

Lately we’ve been getting a lot of requests about dark stained hardwood floors. Seems like deep, rich, dark colored floors are as popular as ever. We’ve been doing 3 to 5 of them a month lately. Good thing we love doing them!

Dark Stained Hardwood Floor

So we thought we’d put together a blog post to answer the most common questions we are asked about choosing, applying and living with dark stained floors.

Let’s go through them one by one…

 

Can my Floors be Stained Dark? Does it Make a Difference What Kind of Wood I Have?

If you have red or white oak (which makes up the majority of Naperville and Chicago area homes) then there is no problem at all. Oak takes a stain very well and we can stain from a light color all the way up to dark colors, as you can see us using in the photo below…

Staining Oak hardwood floors

But… if you have a naturally dark exotic wood floor, like Ipe or Jatoba, then we will strongly suggest that they should not be stained for two reasons:

1) they already look nice and dark naturally – these are the woods people try to emulate when they stain oak – so why mess with mother nature, and

2) they have natural oils in them that can make them extremely hard to get a consistent, even look.

Kitchen with Dark Satined Floors

 

How Dark can I Go?

Pretty much as dark as you want really. This is one of the darkest floors we have done…

Dark black stained Oak

It’s possible to make your hardwood floors solid black if you really want them to be that dark, but most of our clients choose something lighter like a black/white hardwax oil mix,  or Jacobean/Ebony stain mix or a Coffee brown color.

We’ll make up some large sample boards for you to view in your home setting to compare with each other so you can see for yourself how dark you can handle.

Dark stain samples

There are different finishes that allow us to layer colors, such as Rubio Monocoat which can be fumed, have a dark pre-color and then a dark oil applied over top. The photo below shows the result of a three-layered Rubio Monocoat system for very dark floors…

Very dark stained floors

In order to get a more even color and depth, plus a few shades darker, we go also go through a process called water popping when staining floors darker colors. You can read a previous blog post about this process here:  Water Popping Hardwood Floors

 

What Dark Stain Colors and Mixes Are the Most Popular Right Now?

Lately we have been doing a lot of Ebony with Jacobean. For those that don’t want a pure black or dark brown color, this mix looks really nice. You can see a 50/50 Ebony and Sedona Red mix in the image here (covered with Pallmann Magic oil)…

Pallmann Magic Oil Stained Dark

There are also a lot of clients are choosing 50% Ebony and 50% Natural like on the staircase below. We have samples of each that we can show you in person.

Ebony Stained Stairs

Another color that looks great, and is a mix or dark and light, is this mix of Rubio Monocoat Pre-Color Easy with White Oil…

Rubio Monocoat Black White

You can see us applying the white oil over the black base here…

Applying Rubio Monocoat White on Black

I love dark floors so much, I even have them in my own home…

Pallmann Magic Oil dark stained

 

How Easy are Dark Floors to Maintain?

A lot of this comes down to the finish system you put on top of the stain not so much the color of the stain itself. The stain color will be covered by at least 3 coats of finish. Many of our clients love OSMO Polyx Oil or Pallmann Magic Oil, which are very easy to maintain, as is our extremely durable high quality water based finish system.

In my own home we used Magic Oil and are very happy with it.

 

Will Dark Stained Floors Scratch Easy?

This also depends greatly on the quality of the finish system used.

If a cheap finish is applied then it will scratch as easy as a light colored floor with a cheap finish. The only difference is the scratch in the dark colored floor will show through more noticeably as the color of the natural wood underneath is lighter.

Dark Rubio Monocoat Oak Floors

It’s because of cheap, poor quality finishes that dark stained floors have this reputation of showing scratches easily.

If you use a high-end professional grade finish system, either a quality hardwax oil or a commercial grade water-based finish system, like we do here at Tadas Wood Flooring, then you won’t have this issue to worry about.

 

Will Dark Floors Show Dirt More Than Lighter Colored Floors?

Yes, unfortunately this is true. Dark floors are a lot more maintenance than medium or light colored wood floors.

It’s just like how dark colored cars look dirtier quicker than beige cars… not that they are dirtier, but they look dirtier faster because you can see every light colored speck on them easier with the dark background. Hardwood floors are the same.

Every single speck of dust, every single strand of dog hair and every tiny piece of lint will be much more noticeable on a dark surface.

Dark stained hardwood floor

You need to be prepared to sweep your floors at least every other day to have them show off their beauty. But at the same time, if you’ve invested so much into such a beautiful hardwood floor, you should be looking after it and caring for it properly… so you wouldn’t let it get too dirty anyways right :)

 

Will It Make My Room Look Too Dark?

Again our answer for this is – it depends. Especially on the look and style you’re going for in your place.

Most people that ask us this are looking for a more open, light feel. It’s pretty obvious that lighter floors will brighten up small dark rooms and make them look bigger because they reflect light. On the other hand, dark floors will absorb light and have the opposite effect in a small room.

Dark Rubio Monocoat

If you have bigger, more open rooms then it’s not as big an issue unless you have dark maroon or chocolate brown walls. But then again, walls can be easily painted to something lighter if need be.

Dark stained floors will help anchor a room and give you the freedom to put light, bright colors on the walls – or even just white – that will add brightness to the room. We love this look and so do most designers we work with. It’s a very glamorous, classic look that will go with a lot of different furniture styles.

 

In Conclusion…

Choices, choices, choices!

We know this is one of the hardest decisions you’ll need to make when it comes to having your hardwood floors sanded and refinished.

It’s even harder when you’re surfing the web trying to compare colors that don’t seem to match from one photo to the next. Our advice… don’t bother. The color will depend on the camera, the lighting, time of day, if the picture was photo shopped or not and a bunch of other factors.

Staining Oak wood floors

The best thing to do is have your professional hardwood floor refinisher come over with real samples that are a sufficient size to allow you to make a good decision. Put them in every room and live with them for a few days seeing how they look in different light and at different times of the day.

It’s a big decision so you may as well take your time and get it right, it’s not easily reversible.

Tadas Staining Floor

In the end, staining hardwood floors is going to come down to personal choice just like a car color. Some people know that black cars are harder to keep clean but they love the look of them so much that they buy one anyways.

That’s a personal decision you’ll need to make.

When you do, if you live in Naperville or the surrounding area, we’ll be here to help transform those beautiful hardwood floors into the perfect shade of stain you’ve been dreaming about.

Updated Jan 2023

 

You may also like...

142 Comments

Hi-

I really hope that you can answer this soon, but in the 2nd to last pic with Ebony and Sedona Red, what are the mix ratios you have there?

And how will an Ebony and Royal Mahogany mix look? thanks!

Hi,
I am wondering what you think of the Bona stains?? Would love your opinion! Thank you.

Hi Jeff,

It’s a mix of half and half.

Ebony and Royal Mahogany looks great too. It’s a darker and richer color than Sedona Red and Ebony, a very nice blend.

Good luck – Tadas

Thank you for the quick response! What ratio of royal mahogany and ebony would achieve a very dark wood look with a slight tinge of red in it?

I have a can of Dura seal ebony, royal mahogany, and Sedona red. Gonna start experimenting with mixes soon

Hi Jeff,

That’s great to hear! Thank you for coming back to let me know :)

Tadas

Hi Tadas-

This is an update from my original post on 11-6-2013.

I wanted to thank you on your informative website blog as well as your recommendation of 3/4 Ebony to 1/4 Royal Mahogany. I did just that to my white oak floors. 2 coats of it followed by a semi-gloss finish. The results are perfect. I love cleaning and admiring the hardwood floors of my very first home purchase. If I can figure out a way to post a pic here, I would.

For what it’s worth, THANK YOU!

-Jeff

I’d start with 3/4 Ebony to 1/4 Mahogany and take it from there. Just mix small amounts so you have plenty to experiment with. Hope you find a blend you love!

Tadas

Hi there, I live in Estes Park, Colorado and I’m trying to convince the floor guy that I want a darker finish on my 80 year old red oak floors. I need the floors to be “cooler” in color so, not as yellow or red as a natural oak. If I can’t go as dark as Ebony, I I’m wondering what the color of the floor is in the last picture on this web-site. It is the one with the six floor samples. That seems like a happy medium!!

Hi Rachel,

“How much do I sand?” You need to sand all the old finish off, down to the raw wood. The best way to do it is in multiple passes with various grits of sandpaper, from rough to smooth.

“I’m using Varathane poly + stain.” This product isn’t designed to be used on floors, it’s for furniture, trim, cabinets, doors and paneling. It’s not durable enough to be walked on long-term. Best use finishes designed specifically for wood floors.

My main completely “honest’ advice would be to not do this as a DIY project. We have equipment worth tens of thousands of dollars and decades of experience to get the results we do. You just can’t get the same results with cheap hire equipment unfortunately. Sanding floors is not an easy DIY project. Things can go bad quickly. When they do, it can get very expensive and time consuming to fix. Best to leave the DIY stuff to paint, trim etc. If you decide to go ahead anyways, practice on an old section of flooring in a back room or attic first so you don’t do irreversible damage to your main floors.

Tadas

Hi every one I’m straight beginner never sanded or stained ever actually I’m going to do all the flooring back to the question sorry ,! How much do I sand ? I’m using Varathane poly + stain gloss
I’m staining it Black Cherry
And please. I can take all the advice needed if this isn’t a good stain please tell Tell me be honest Thank you so much Rachel

Hi Tia,

You shouldn’t have to “convince your floor guy”, he should be doing the color you want, they’re your floors after all :)

Dark floors can be a challenge though which is why some guys shy away from them.

That floor you asked about is my living room floor – it’s 25% Ebony/ 75% Natural on water popped red oak with an oil based polyurethane applied.

Hope you end up with a color you love.

Tadas

hi

we live in the uk!
great blog thankyou!

i wanted to ask, we wanted to do darker floors in our place, and we wanted to use the osmo polyx oil, but no one around us sells the osmo polyx tints…..so…..do you think it would be ok to use the clear polyx oil, over a different brand wood stain?

if so, what should we look for in a stain to make sure it is compatible with the polyx oil???

thanks!

Hi Katrina from the UK,

Pretty much all of the floors we finish with OSMO we stain first with a different brand of stain. You can see pictures of a few of those jobs on our photos page here if you scroll down a bit:

https://napervillehardwood.com/photos_of_hardwood_floors.html

Just make sure the stain is dry before applying the OSMO oil. We have used Duraseal and Minwax stains so you should have no trouble with either of those. If you’re concerned about compatibility always do a test sample to make sure.

Good luck Katrina

Tadas

Ivy

Hi,
I’m trying to find a stain for my family room colums and mantle that will match my dark cherry cabinets. Would you use the same color on the wood floors as the columns? We have been looking at the Minwax colors. The color appears so much lighter on wood samples. Need some advice.

Thanks,
Ivy

Hi Ivy,

Personally I would choose a different color for the columns than the floor color. You could go darker or lighter depending on your taste. Keep it within the same basic color range though.

Sometimes the stain samples you get have been water popped first so the color is deeper. You can read about water popping on our blog post here:

https://napervillehardwood.com/blog/what-is-water-popping/

Hope it goes well for you.

Tadas

Ben

I love the ebony/Jacobean mix. What is the ratio?

Hi Ben,

I’m pretty sure it was 50/50.

Tadas

Tom

Do you recommend Sherwin Williams or Minwax for an Ebony stain?

Thanks!

Hi Tom,

We use Duraseal. It’s much better than Minwax because it acts like a sealer as well as a stain. They have pretty much the same colors too.

Tadas

Hi Tadas,
We love reading your articles, extremely helpful and interesting! Great work you are doing here in Chicago!

We decided to go with Ebony color (DuraSeal) on red oak floors. Still can’t decide on the finish. We are thinking to go with oil based polyurethane. In your last picture on this website, what is the finish type: Matte or Satin?

Thank you for your help in advance :)

Hi Gabija,

Thanks :)

That floor was coated with a satin finish.

Tadas

you mention Jatoba wood …. What would you use to protect? Want to keep color as natural as possible & really do not like the finish from poly / urethane products!

Hi Kiki D,

Personally I would apply a low sheen/matte waterbased finish. This will preserve the natural color and not darken it like an oil based product would.

Tadas

Hi- we are struggling between jacobean, dark walnut and antique brown. We want something with no red in it and is pretty dark but not as dark as ebony. We see a lot on the web about jacobean and dark walnut but not as much about antique brown. Do you have thoughts on these 3 and why antique brown doesn’t seem to be as popular?

Hi Christie,

Not sure why Antique Brown isn’t as popular but we do quite a few Jacobean floors. It’s a good shade that goes with a lot of styles. I think its popular because it’s not too dark and doesn’t have a reddish hue to it that is out of style at the moment.

Whichever one of those 3 you choose will look great though.

Tadas

Hello. I am glad to have found your blog. I’m looking to refinish approx 1000 sq ft of red birch hardwood flooring. I’m just not in love with the lighter colored floor and wanted to go darker. I’ve read on other sites that birch does not take stain easily. Which process would you recommend? I like the satin finishes and am not opposed to one of the hard wax oils that you reviewed (Pullman, Rubio and Osmo). Whatever finish I ultimately decide on is going to have to stand up to my dogs and their “accidents”. Any help would be greatly appreciated.

Hi Dodie,

Birch will act like maple with stain – in other words it can be difficult if you don’t know what you’re doing. Pallmann Magic oil or Rubio would work fine. The only potential issue is the regular dog “accidents” you mentioned. Because of this I would lean towards staining with a regular stain and then finish with good commercial grade finish like Bona Traffic or or Pallmann 98. In either case the dog’s accidents could still ruin the floor if not taken care of right away.

Hope it goes well for you.

Tadas

I’m getting ready to sand & stain my floors . We just ripped up the rugs that were covering them . The floors look to be a medium redish oak .. The problem is the previous owners dogs peed all over the rugs ! It seeped through & so many dark spots are showing .. I’m thinking I have to get a dark stain . Is there any other way to go around this ? Dark is gorgeous but I’m not sure if I wanna deal with the up keep .. Thanks

Hi Janis,

Yuck! I hate dog pee and carpets. You only really have two choices. The first is to use a very dark stain like you mentioned. The other is to remove and replace the damaged boards. Then you can use any color stain you like. The second option would depend on how extensive the damage is and the cost to do.

Hope you can get it sorted out.

Tadas

In your photo with the six samples, can you tell me what each of them is and what finish you used. I’d also like to know if you used a water-based or oil-based finish.
Thank you!

Hi Jean,

Wow that was a long time ago… let me see if I can remember.

The finish would have been Pallmann 96 satin – a waterbased finish.

The colors in the top row, from left to right (from what I can recall) are: 1) Natural, 2) Custom blend I think, maybe Spice Brown and Jacobean??? 3) English Chestnut

The bottom row: 1) Golden Pecan, 2) Golden Oak and 3) Dark Walnut

I could be wrong on some of those though so don’t hold me to it :)

Tadas

Hi Tadas~ I’m a little nervous. I want a dark floor and I know the trend is for a satin finish but I’m concerned that if I use a satin finish it will look dull. I don’t want it to look like a basketball court (super shiny) but I’m worried it would look blah. Can I turn up the shine just a little more on a satin finish? Would water popping help a satin finish look a little more glossy. Am I wrong that satin finishes are dull looking?

Hi Maureen,

Sorry for the delay. Satin finishes are very nice and it’s the most common sheen we apply. It still has a nice sheen that’s not too shiny but no too dull like a matte or super-matte sheen.

I would ask for a few samples on a largish board so you can compare each gloss level. And no, water popping will have no effect on the sheen level.

Hope that helps.

Tadas

Sam

i bought 5″ number 3 white oak for my apartment because I really liked the color differences between the boards. I’m wondering if you recommend staining dark or light on these floors?

Hi Sam,

It’s hard for me to say one way or another without seeing your apartment and the color of your furniture, walls etc. Either dark or light looks good but if you really like the natural color in the boards then maybe lighter would be the best way to go.

Tadas

Hi Tadas,
I want a modern look for my floors. .
what is ur opinion about provincial in minwax and what finish satin vs smigloss?will combination of provincial and dark walnut look good?
my husband likes red mahogany —–what combination with red mahogany will look good.
what do u suggest. :)

Hi Sajju,

Provincial is a very nice color. Not sure it would be classed as a modern look though as it is quite traditional. Mixed with dark walnut would darken it and give it a more modern edge. As far as sheen, satin is definitely a more modern look.

With red mahogany, if you like dark, deep rich shades then 50% that with 50% ebony looks stunning. It has the reddish hues in the light but dark in the evening or in shade.

Hope that helps a little. It can be hard choosing can’t it.

Tadas

Hi!

I am looking to redo my floors to a nice dark espresso or ebony color still deciding. I have three questions if you can help

1. Do you need a preconditioning stain or would waterpopping work just as well?

2. Which is better for dark floors oil or water base? I heard the oil gets a yellow color and I do not want it to look weird over time what do you recommend?

3. The same goes with the finish I am guessing if you use water base stain you have to use a water base finish any recommendations which brand finish you prefer?

Thank you for all of your help in advance!

Hi Kimberly,

Here’s some answers for you…

1. Water popping will work fine.

2. Either one will work over a dark stained floor. The choice will come down to the factors talked about in this series of posts here:

https://napervillehardwood.com/blog/how-to-choose-hardwood-floor-finish-part-1/

3. No you can use either type of finish over a water based stain. As far as finish recommendations, have a look at the last post in the series in the link above.

Hope that helps.

Tadas

Hi Tadas,

your blog is so informative!
Have you ever tried a mix of Ebony and Grey on red oak? ebony alone is too dark for me, ebony and jacobean too brown. I don’t seem to find any tests to lighten up the ebony taking away a bit of the red tinge of the red oak (my intent).
Thank you so much!
cristiana

Hi there!

I’m looking for the same color combination as you described with choosing my hard wood stain color.
How did yours turn out? My wood guy only applies one coat of stain. Not sure if that’s normal. What color/colors did you go with?

Thank you,
Shelly

Hi Cristiana,

No we haven’t done that combination. To take away the red tinge and add grey I would suggest using this product first:

https://napervillehardwood.com/blog/rubio-monocoat-pre-color-easy/

Tadas

I have red oak floors and want to stain a dark color. My great room adjoins my kitchen, but I have tile in that room. However, my cabinets are clearly visible. They are a dark brownish/red maple. I think I should match this or either go lighter (in the same tones but don’t want to). Any color suggestions would be greatly appreciated. I’ve mixed about every Minwax color combo I can think of. I kind of like Expresso/Red Mahogany mixed but am afraid it will be too red. I have about 1200 square feet in 3 rooms.

Hi Donna,

What was the percentage mix of the Expresso/Red Mahogany mix? If it’s too red just add more Expresso to it. Make it 75/25 for example. If your kitchen is covered in tiles then there’s a pretty big separation between the two. I think you could make it work. Best to get some large samples though and see for yourself.

Hope you can fins a shade you love Donna.

Tadas

Can you mix and use polyshades for the floor if you’re going to apply multiple coats, or should I just use regular stains then apply a Polyurethane over the top of the last coat?

Hi Richie,

We definitely don’t recommend using Polyshades for floors. Use a good quality stain first and 2 or 3 coats of finish on top.

Tadas

I am refinishing my red oak floors and want to go darker. I am trying to decide between antique brown and rosewood. I have cream colored kitchen cabinets. I do not want the floor to have any red in it. Which color do you suggest?

Hi Judy,

Sounds like Antique Brown would be better suited if you don’t want any red shades.

Tadas

Hi we ar putting down Dom brown wood look tile in hall and kitchen. The staircase and adjacent room are a oak hardwood.we are looking to stain them should they match if so it would be ebony stain.. we are afraid it will all look to dark is it ok to use Jacobean do you think it ebony on stairs and Jacobean in adjacent floor of living room?

Hi Jean,

I would make a large sample board of both colors and place them in those locations for a few days and see what you think. Yes you can mix stain colors, you can do whatever you like :)

You could also do a blend of both if you like so it matches a bit better.

Tadas

Hi, we are thinking into investing in hardwood flooring. I do like darker colors and shiny…I cant decide, but I would really like a modern and traditional look. What would you recommend…thanks

Hi Marina,

This is a hard one because modern and traditional are very different looks. For shiny, you can choose a full gloss or semi-gloss finish. If you like dark but not ebony then Jacobean is very popular. It’s also probably the closest to a modern/traditional look too.

Hope that is somewhat helpful.

Tadas

I just did some old white oak(that’s what I was told they were) floors upstairs in my house with Mini wax Jacobean they were sanded and finished. Look great and are dark.. I put in new white oak flooring in my downstairs and stained With Jacobean Stain ( different brand) and the flooring is much lighter than the upstairs and I am not happy about this as I had them professionally done.. Why would there be such a color difference ? maybe due to the age of the wood? Or may be it was a red oak and not a white oak ?? Maybe the commercial Jacobean stain is not the same as min wax brand? Any ideas would be helpful. Many thanks

Hi Karen,

Sorry to hear this. Very frustrating. Could be a number of things…

1) The grain and cut of the old wood vs the new wood. If the old wood is plain sawn and the new wood quarter sawn, there will be a difference.

2) Possibly the darker floor was water popped and the lighter floor wasn’t

3) As you mentioned, the color of the stain was different as it’s a different brand

4) And again as you said, it could be a white oak vs red oak difference.

Hope that helps.

Tadas

Hi I had professionals use the minwax ebony color on my floors. one coat didn’t look good and a second coat was added and it too dark. Can I add a jacobean on top to make it more brown?

Hi Lenore,

No I wouldn’t add more stain. We only ever apply a single coat. Any more and you start to have finish adhesion issues. The best way to get a darker shade is to water pop first. Did he do that?

Tadas

Ami

Hi! I just had my red/white oak hardwood floors stained with 2 coats of ebony/dark walnut. They are a really nice, dark, rich color. My floor guy uses masterline oil based poly in a satin finish, but I can’t find much information on this product. Of course I don’t want them to look dull, but I also want little to no shine to go with my industrial glam decor. I have read that different brands with the same sheen look different (i.e. one brand may look more matte while another brand may look more semigloss. different shine %’s or something).

So, my questions are….Is this a good product to use on really dark floors? Is oil based poly better on darker floors? Will there be very little shine to their satin?

Hi Ami,

Masterline is a entry level finish. We don’t use it so I don’t have any experience with it sorry. Satin still has some sheen to it, probably more than it seems you want. Try getting a matte sheen. Yes oil poly works well on dark floors.

Hope you can get it sorted.

Tadas

We are about to have our maple floors professionally refinished and stained. Our contractor has explained that it is best to only put 1 coat of stain. He says in his experience the color looks muddy with additional coats of stain. I was hoping that an extra coat of stain might help make the floors look darker and more consistent in color when dealing with the maple issue. We plan to use Duraseal Jacobean and he did a small sample on our floor. He didn’t waterpop the sample but plans to waterpop the floor before staining. What are your thoughts about 2 coats of stain?

Hi Melissa,

Your floor guy is correct. Only ever do 1 coat of stain. Otherwise there can be issues with the adhesion of the finish.

Tadas

Hi there,
We have just had our red oak floors sanded and prepped for staining this Thursday. Our original floors were stained Provincial (?)l and then Antique Brown (stairs and bedroom in 2006 addition). Meanwhile, our living, dining, family and kitchen have been prepped and we wanted to add a darker shade that would blend with antique brown. Would Jacobean or Dark Walnut be better to compliment with antique brown existing on stairs? I’d rather not have the “red” hues. Please advise. Thanks in advance.

Hi Lisa,

Sorry for the delay. I’m guessing you have chosen a color by now. I hope it looks great and you love your new floors.

Tadas

We are having our red oak floors refinished and extended through two other rooms. I want a rich brown without red undertones but as the light changes throughout the day I go from loving to hating a color. I loved coffee brown yesterday but now I’m worried about it pulling too much red. The man who applied the stain said it has green undertones to fight the red. What is your opinion of Duraseal Coffee Brown on red oak? I am trying to update the look of our home but not go too dark either. I also have Jacobean, and Ebony and combinations of those plus a water popped version too. Is Jacobean more red? It seems to be to me, but I read a lot more about the popularity of Jacobean than I do Coffee Brown.

Hi Laura,

It’s really hard to say without seeing the floors, lighting etc in person. I say live with the samples for a week or so, take your time, look at them at all times of the day and then you’ll have a better idea. Personally, I like Jacobean.

Tadas

Hi, need recommendation asap re floor stain for red oak floors. I’m between Dark Walnut and Espresso to match with Antique Brown which is in a bedroom and down the stairs. Can you provide any insight as to which one I should choose (Minwax). Thx.

Hi Lisa,

That’s really a personal taste choice but to make it easier, grab some sample boards and stain both colors and put them up against the existing color and see what you prefer. Because it’s downstairs, it won’t be as critical compared to an adjoining room.

Tadas

Hi, I’m in need of help, I have oak parquet flooring on it’s way, plus the treds and banisters to do on my stairs, I’m loving the dark colours of Jacobean and Ebony, but love be in the uk, also need it to be tough as I have dogs(paws), I’ve been reading all your blogs, but still need it spelling out to me,ha, what do I use for all my surfaces, want it to look rich with a satin finish, please help, Thankyou Char.

Hi Charlotte,

If you’re in the UK I’m not 100% sure about what finishes they have there. Pretty sure they will have Bona and Loba though. They both have great commercial grade water-based finish systems that will withstand your dogs paws and have a beautiful satin sheen.

You can read about the Loba finishes we recommend here:

https://napervillehardwood.com/blog/how-to-choose-a-hardwood-floor-finish-part-4/

Hope that helps.

Tadas

Hello, I have read many of your articles and have learned so much from you! Thank you for your blog! I would hire you in a second if I didn’t live in Arizona. I am about to have my character grade hickory engineered floors sanded for the second and last time and need some help on color and finish. I have a cherry cabinets and dark walnut and mahogany furniture. The floors are currently very dark and the last stain job was horrible. I am thinking of going natural but don’t know if the character grade hickory would clash with my kitchen and furniture. Can you suggest a color for me? Also, since I will not be able to sand the floors again, I am thinking of either using rubio monocoat or pallmans magic oil instead of poly. Do you agree with that? Thank you!

Hi Terri,

That’s hard to say without seeing your place in person. I think going natural would most likely look OK though. It would make them easier to maintain and spot repair down the road if you choose a hardwax oil. Try to get a large natural sample and live with it for a week or two. And yes, I would definitely recommend looking into using a hardwax oil.

Tadas

HI,
We are in Mi, just moved here from Downers Grove Il. We tried mixing 2 parts Kona Rustoleum with 1 part Royal Maogony Duraseal and put 3 coats of oil on top. In direct sun, when looked at from an angle, it gets a purple haze. Have you had this problem? Our contractor thinks it is just from the window reflecting on the sample and does not seem to think it will be a problem. We want to make sure we do not end up with purple floors.
Time is of the essence as we are already delayed a few weeks trying to get the right color.
Thanks

Hi Laureen,

Not sure what is happening there sorry. We never mix two different stain brands together and have never used Rustoleum either.

Sorry I couldn’t be of more help.

Tadas

Hi Tadas,

I’m hoping you can help me to figure out if I should try to change the color of my Acacia floors. The builder installed this species and it has orange/brown tones to it. We have a 94lb Akita who has made some scratches and to correct it we need to sand it down so it would also be the time to change those orange tones to Jacobean or maybe dark walnut? I can’t find many examples online of Acacia and how it accepts stain. I have had one sample come back but it appeared blotchy.

Any advice you could give would be greatly appreciated!

Kind regards,

Susan

Hi Susan,

We don’t have any experience with Acacia sorry. I would suggest trying a water-popped sample too. That may help with the blotchiness. You can see how to do it here:

https://napervillehardwood.com/blog/what-is-water-popping/

Tadas

DT

How much would it cost to stain a +15 year old oak floor a darker color per sq ft?

Hi DT,

Without seeing your floors in person, I would be just guessing. It depends on so many things like the condition of your floors, the layout of your home, what finish you want to use, are there repairs needed etc.

Best bet would be to get someone out to have a look for you and give you a quote after seeing them.

Good luck with your project.

Tadas

I just re did my hardwood floors in special walnut and the color came out way too light. Is there anything The floor guys can do to darken it?

Hi Melissa,

Sorry to hear that. Unfortunately there is no way to darken them unless you re-sand them :(

Did they water pop the floors before staining? That will give you a darker shade:

https://napervillehardwood.com/blog/what-is-water-popping/

Tadas

Why do the grains in the timber show unevenness in floor levels on a dark stained (Walnut) timber floor? The finish on the floor is semi gloss (50%).Can this be corrected or is that the natural appearance?

Hi Dayal,

Do you mean uneven sheen levels? If so, no, that isn’t normal. It’s user error. It will have to be buffed back and a new coat of finish applied.

Tadas

Hi,
We just purchased a house with 60 year old red oak floors and have decided to remove all the carpet and replace the pee stained boards with new ones. We are refinishing them and I am so confused on which stain color to go with. Everything I read says go dark and no red or yellow tones. What colors would you recommend for a medium floor color and a dark color? We will be doing the water popping as I think I want them a little more uniform in color. Is Dark walnut too dark? And is special walnut too light and red?
Thanks so much for your help!

Hi Sheryl,

Colors are very subjective and personal. If you are going to be living in your home for many years, I would go with whatever you like. If you want to sell soon and want a popular color, Jacobean and Dark Walnut are safe bets and will always be long-term favorites.

Hope you end up happy with your choice :)

Tadas

Hello –
What are the 6 stain colors in the last picture?

Hi Sheri,

The colors in the top row, from left to right (from what I can recall) are: 1-Natural, 2-Custom blend I think, maybe Spice Brown and Jacobean??? 3-English Chestnut

The bottom row: 1-Golden Pecan, 2-Golden Oak and 3-Dark Walnut

I could be wrong on some of those though as it’s been a while so don’t hold me to it :)

Tadas

I am redoing my hickory hardwoods. what color bona stain would look good with hickory cabinets in large room with a gray and beige ceramic tile in next room

Hi Kim,

Hmmm… I would look at Driftwood, Grey, Birch and Twig to start with.

Tadas

Just had my dark floors sanded and finished with 3 coats of loba AT invisible. Some floor boards seem to contain stain in the white oak floors. Is this norma?

Hi Matthew,

Not sure what you mean exactly, but if you didn’t apply a stain, then no, that’s not normal. Is it markings or stains in the actual wood, or the finish?

Tadas

I just had white oak floors installed. We had them stained mix of Ebony and true black. They used the Glitsa Poly finish. Now I have these white lines in between the planks. What caused it and what can I do about it?

Matthew, Is there any way to have mahogany wood floors stained dark? If not, then I would at least like to take some of the red out of my floor
and also wondered if you used a green stain on the mahogany if that would help counter the redness? Thanks, Michele

Hi,

I have american cherry floors and want to stain them darker. Is this possible to do. I’ve been told no in the past, but someone told me that with the new gel stains out there it is possible. I’m looking to get rid of the red and blonde tones in the wood.

Vicki

Hi Vicki,

It is possible to stain cherry darker. We built our house and going with cherry cabinets, trim, baseboards, doors. And floors in three large rooms. At the moment I am indecisive on whether or not to stain our cherry floors.

I decided on natural doors, trim and baseboard but torn on the floors, stain or natural? My cabinets are stained with a blend of 3 different color stains, 2 part (50%) cherry, 1 part (25%) mahogany and 1 part (25%) Jacobean. Some of the cabinets (they were custom made) were delivered today, they are gorgeous. Simply gorgeous.

I am just not sure about staining the floors this same color with all the trim and baseboards being kept natural. I am hoping Tadas responds soon, maybe he could tell me if this would look alright or not.

Hi,

I have factory finished “Bellawood” Matte finish Brasilian Koa. We made a huge mistake of putting it next to a high-end medium to high gloss custom inlay rich older deep colored Cherrywood floor.

A. Can we strip off the matte factory finish?

B. Can we stain it darker? What color would you recommend? It currently (after 2 years) is just way too orangish and clashes terribly with the wood in the hallway.

C. Can we put a medium to high-gloss finish to match the cherry floor?

D. Do you know of someone in the Pheonix, Arizona area who you would recommend? (It’s a master bedroom, about 400 sq feet)

Thank you Tadas!

Dawn

Hi Dawn,

A) Yes

B) Yes, as long as there is enough wood to sand.

C) Yes

D) No I don’t sorry. Hope you find someone good. Use the info on our website here to vet them.

Hope it goes well!

Tadas

Hello,
Your site is very informative! Might I ask you for advice? I did want dark floors up in Lake county. The stain is on (Drying) my red oak and I feel I’ve made a mistake and let them get too dark. (Ebony mixed with Red Mahogany 2:3). The finish has not been applied yet. Is there any way to dial back the color without re-sanding the entire floor and starting over? (either lighten it or make it a bit warmer with additional brown?). thanks for your advice!

Hi Pepper,

I don’t think you’re going to have any luck lightening Ebony + Red Mahogany stain sorry. The only way I could see this working is if you apply a white wash type finish like Bona Nordic Seal:

https://www.bona.com/en-US/Bona-Professional/Products/Coatings/Waterborne-Finishes-and-Sealers/NordicSeal/

Dont think that would look very good though. Looks like you may need to re-sand sorry.

Tadas

We are debating 100% Jacobean or 90% Jacobean/10% ebony. Would we see a noticeable difference?

Hi Freddy,

It won’t be a huge difference no. Do some samples first to see and go from there.

Tadas

Hello,

We have red oak dark walnut stained floors in our living room, hall and dining room. I would like to install some type of hardwood floor in the kitchen but would prefer to complement our current hardwood floor vs match it. Do you have any suggestions with regard to type of wood and stain?

Thanks,
Stacey

Hi Stacey,

The best compliment would be to use the same red oak and then use a different colored stain. Did you want to go lighter or darker?

If lighter, then a color like Early American or Provincial could work. For darker maybe look at a mix of Jacobean and Ebony. Start with 25% Ebony and see from there.

Ideally you can make a bunch of samples and see how they look first.

Good luck with the project.

Tadas

Hi
I just bought a new house and have to pick a stain for new red oak floors.What stains do not have red in them. Also do not like the yellow or orange either.
thanks
robert

Hi Robert,

Try Dark Walnut, Ebony or Heritage Brown.

One of those should work.

Tadas

Hello, I have just installed brazillian cherry wood. What color stain would you recommend to achieve the same color as your work with Red Oak stained with ebony and Royal mahogany? On Brazilian cherry this combo looks like dark brown. I’d like my floors to look dark blackish with dark red undertones, not brown. Please advise
Thank you

Hi Zara,

I’m not sure to be honest sorry. We have never done a color combo like this with Brazilian Cherry. As you can see, staining oak is very different. You may need to experiment with dyes or pre-color treatments to get a color like that. Sorry I can’t be of more help at this time.

Tadas

Hi Tadas,
You reference above ‘one of the darkest floor we have done,’ do you remember which stain was used? I love that look!
Jennifer
Raleigh, NC

Hi Jennifer,

For this floor we used Precolor Easy Intense Black, Rubio Monocoat Charcoal and Black Universal Maintenance Oil.

It’s a nice looking floor and very, very dark.

Tadas

HI
I have gorgeous hickory floors but I am bored with color and I love black. How would you suggest to get a light ebony color where it doesn’t look like ink, but more sheer? Should I mix black with white? we are using Duraseal.
TY

Hi Rene,

Try mixing it with Neutral first in various percentages to see how that looks. It will lighten the color but not change the shade as much.

Tadas

Can I use a dark stain on ash floors?

Hi Angie,

Yes. Just don’t over sand it with too fine a grit. 100 grit and a water pop will work fine.

Tadas

I am getting a blotchy area around the fireplace when applying ebony stain. The rest of the floor looks great. How do I fix this blotchy area? I’ve sanded, stained, resanded, conditioned and still blotchy.

Hi Connie,

Hard to tell without looking at your floors in person sorry. Most likely it’s due to either irregular sanding and blending (different machines used for the edges vs belt sander etc.), water-popping, staining or a contaminant in the wood.

Sorry I can’t be of more help.

Tadas

Hi there. What is the color in the very first photo at the top?

Hi Michael,

If I recall it’s sand to 100, water pop, Duraseal stain mixed 25% Royal Mahogany + 75% Ebony, 3 coats of two component water based finish.

Tadas

It’s a custom blend of Ebony and Royal Mahogany.

Tadas
————————–
Is there any chance you can tell the steps you took to achieve that color? Is it just sand/water pop/Ebony and Royal Mahogany? Any estimate of the stain ratio?
It just looks fantastic.
I have Ebony/Jacobean/Royal Mahogany and have been testing combinations but all I achieve is a mess. Does the finish coat work some sort of magic? I haven’t tried sealing any of the test pieces. I’m working with white oak. Thank you for all your advice!

Hi Karen,

It’s a custom blend of Ebony and Royal Mahogany.

Tadas

Could you tell me the name of the floors and exact stain in the 3rd picture? Thank you!

Hi Anna,

They are white oak floors with Rubio Monocoat Charcoal as the finish.

Tadas

I’m replacing old stair treads with oak treads and love the look of the one in ur blog with ebony and Natural. How do i get my treads to resemble this look and how should i finish them? Thanks in advance

Hi Will,

You’ll have to sand them, water-pop them and stain them with a 50/50 mix of Duraseal Ebony and Natural. These stairs had a satin two-component waterbased finish applied.

Tadas

Hi,
I really love the floor color pictured above in the kitchen. Do you remember what blend of colors were used?

Hi Katie,

That one is a Duraseal ebony/Dark walnut mix and finished with magic oil.

Tadas

Hi,
Sorry, I didn’t clarify. The first kitchen photo pictured, it’s the third photo down from the top.
Thanks!

Hi Katie,

There’s a couple of kitchen photos above. I’m assuming you mean the one immediately above, the last image. It’s Rubio Monocoat Black.

Tadas

I love the dark colors and the samples you have provided. I do have two questions.

1. On 5th picture scrolling down, there are three squares samples of hardwood. What stain color is the third sample (below the center sample)?

2. What would be the best clear hardwax oil to use? One that is not shinny, I like the matte look. I would guess the Rubio Monocoat would be a good option.

Hi Gerson,

That color is Rubio Monocoat Ash Gray. Yes Rubio is a great option.

Tadas

I have pine floors in the bedrooms. Refinisher said he’ll use duraseal stain and Absolutely Grand water based polyurethane. Are you familiar with polyurethane and would you use it. Thanks

Hi Jennifer,

I’ve never heard of that brand of finish sorry. Duraseal is a good brand of stain though.

Tadas

Hi, great, informative blog thanks so much. We have just bought a house (in Australia) and it has bamboo flooring that we just don’t like the colour of and I was wondering if you would be able to stain that a dark colour? And would this be done the same way as other ‘wood’ flooring?

Thanks
Jess

Hi Jess,

Bamboo can be a tricky one. Most are full of glue, used to laminate the thin strips of “grass” together into a plank, and glue doesn’t take stain very well. If its strand woven, then that is difficult to stain too and not turn out blotchy. The stained ones you see in showrooms are usually sprayed on in the factory as part of the finishing process. As I don’t know what type you have, I suggest doing a few samples in a closet, or under the fridge/stove. See how it takes and if it’s too blotchy for your taste. We don’t do bamboo floors for these reasons.

Tadas

hi Tadas Sadunas –
I know you mentioned leaving exotics alone… Can you stain Santos Mahogony a dark brown? We are trying to get rid of the “red” tones. Also, it’s 3 1/4″ wide… worth the effort or replace with a wider plank in something like a pre-finished hickory?

Hi Mary,

Yes, Santos Mahogony can be stained darker. Much easier than replacing with new flooring.

Tadas

Hello! Would it be possible to get my alder floors to look like the pic with the stairs that you posted?

Thank you,
Robyn

Hi Robyn,

Yes you could get a similar result. This color is 50% Ebony and 50% Natural. They were water popped before staining to give a more even, darker color. It won’t look exactly the same as the oak floor in the photo, but very close.

Tadas

Hello,

I am planning to use Duraseal stain on red oak floor, Looking for a dark color with minimal brown for my stairs. I have gray walls, white molding and gray & white floor tiles. Which color would you recommend?

Hi Devi,

I’m just doing up a sample that is a mix of Heritage Brown and Weathered Oak. I think this mix would look great in your situation. Dark, minimal brown and would go great with the grey.

Tadas

I have red cherry floors that have been sanded and will be water popped next week. I do not want any red showing. Will using Duraseal Ebony give me a dark wood with no red or do I need to use Duraseal True Black on my floors? What will the differences between the two be?

Hi Melissa,

Sorry if this is too late. It’s crazy busy here and I’m a week or two behind on these comments.

I would go with Ebony or Heritage Brown. Both have green highlights that will remove the red. Both are dark. Water pop before applying.

True Black can be a difficult color to use, even for professionals. It has a lot of pigment that can cause issues – like not drying properly in certain circumstances and then coming up when finish is applied.

Tadas

Hello Tadas Sadunas,

I hope this message finds you well. I am reaching out for your guidance, intensely appreciating your blog’s invaluable insights.

I’m currently addressing a flooring issue in my hallway. My entire home features Teragren bamboo in a distinct charcoal color, which I want/need to replicate in the hallway for uniformity. The original hallway flooring, needing repairs (due to water damage), was reworked using leftover material. Unfortunately, the subcontractor’s repairs were substandard, leading to an unsatisfactory finish. The supervisor has recognized this shortfall and suggested a redo.

The challenge, however, is that the original charcoal bamboo flooring is now discontinued. The closest alternative I’ve found is Teragren’s natural carbonized bamboo. After thorough discussion and research, my contractor proposed staining the replacement bamboo to match the existing charcoal floors throughout my house. My concern lies in accurately matching the color and ensuring a quality finish. Could you please recommend a specific color mix or staining technique that best replicates the charcoal shade with a satin sheen? As a lung cancer patient, I prefer water-based finishes, ideally with a two-component system, to minimize chemical odors. I would greatly appreciate any expert recommendations you have.

Thank you so much in advance for your prompt and knowledgeable advice!!

Best regards,
Moony

Hi Moon-Sook,

Sorry about your floors. Unfortunately, it’s virtually impossible to give color matching advice online without seeing the actual floor in person. Matching colors is an art. And bamboo is especially tough to stain. I’m guessing the original bamboo flooring was stained in a factory under certain conditions and with automated equipment that will be impossible to replicate the exact look on site. But you should be able to get very close.

My advice would be to do numerous color samples with the exact flooring product you’ll be using. Try different shades and mixed to get a very close match… it will never be perfect.

Try water popping for a darker color: https://napervillehardwood.com/blog/what-is-water-popping/

Then match the sheen of the floor as close as possible. If you can, I would suggest going over the entire floor with a topcoat so the whole floor has a matching satin sheen. Sheen levels can vary quite a bit between finish brands.

Hope that helps a little. Good luck!

Tadas

Your work is so beautiful! Can you please tell me what stain color was used on the floors in the photo of the kitchen with the blue cabinets and the big white range hood? Thank you!

Hi Lisa,

That’s Rubio Monocoat Black :)

Tadas

Leave a Reply to Dayal Cancel reply

Your email address will not be published. Required fields are marked *

(Comments are moderated and may take a couple of days to be approved.)

Please answer the question below before submitting your comment:

Back top top
shares