Skip to Content
BLOG:

Beautiful Hardwood Floor Heating Vents

10 Comments

One of the best bang-for-your-buck add-ons you can include in your hardwood floor install and/or refinishing project is upgrading your heating vents. Most people don’t give them much thought, but they can really add to the finished look of your floor if done right.

Wood Floor Heat Vent

If your home is like most people’s you probably have the standard metal vents that do the job adequately enough but don’t really blend in too well with your wood flooring.

Or maybe you’re one of the unfortunate ones that has ugly stepped on, concaved, dented, scratched, rusted and chipped metal ones that stand out like an ugly sore thumb on your floor. You’re definitely not going to re-install those on your new floors – right?

So what options are there if you’d like to treat your floors to something better?

Well there are two different types of wood vents you can choose from – self rimming wood vents and flush mount wood vents. The self rimming ones have a rim that sits on top of the floor surface and are about 3/8 inch high off the floor, the flush mount vents are inserted into the actual floor and sit even with the floor surface.

 

Self Rimming Wood Vents:

These types of vents are a common sight on hardwood floors here in Naperville because they’re easy to find and they look much better than the cheap metal vents. They are super easy to install as they just easily drop over the existing heating duct openings just like the metal ones – there’s no cutting, trimming or messy installation needed. Access to the heating ducts is as easy as lifting the vent out and reaching in.

One of the biggest pros of this type of vent is also its biggest con – the fact that it easily sits on top of the surrounding floor supported by its rim. This just doesn’t look as nice as the flush mount vent option.

Self Rimming Vent

Also you may not be able to get perfect fitting sizes for your duct openings, that may or may not have been cut out accurately by the original contractor. As a result, most self rimming vents sit a little loose in the duct opening. While this doesn’t affect the looks as the overhanging rim covers the hole adequately, if you’re a bit of a perfectionist it will drive you a little nuts at times.

Also as they don’t sit flush with the floor, self rimming vents will get dinged around and damaged more easily than flush mount vents.

 

Flush Mount Wood Vents:

Flush mount vents are the Rolls Royce of wood floor vents. They look great sitting flush and look seamless as they completely blend into the surrounding hardwood floor.

Because they’re even with the surrounding hardwood floor, cleaning is a breeze. If you need to access the duct opening you can easily remove the vent from the built in surround for easy access. They also come with built in dampers to allow airflow or shut it off from that particular duct.

One of the nicest features of these types of vents is that they can be stained and coated to the exact same specs as the hardwood floor making them even more seamless…

Flush Mount Vent

And we can get them in the exact same species of wood you have too.

Of course, like anything that looks great, there’s some extra work to get them installed.

Wood Floor Vent Install

They can be installed quite easily in a new hardwood flooring install but with some skill, patience and special tools they can be retro-fitted into existing hardwood floors as well. In fact we do a lot of these retro-fits for our clients.

So… if you want to do something special with your heating vents for your hardwood floor project, ask us to bring a sample of our flush mount wood vents so you can see them in person during your free in-home estimate. We’ll be happy to show them to you so you can choose the perfect ones for your floors.

Updated Jan 2023

 

You may also like...

10 Comments

I do agree with your fanstastic idea of the vent!

Thank you Mr Chen :)

I would like to install these as a retrofit to my existing oak floor when I get it refinished. How do I know if I need red oak or white oak vents? I don’t have access to extra pieces or endgrains. Should I just get white oak? I am planning on staining them chestnut brown. Thanks, Chuck

Hi Charles,

The first image above is white oak. The second is red oak. There are tests you can buy but that’s a bit complicated. I would ask the refinishing guys to check for you. They should be able to tell you. Otherwise yes, you could just go with white oak ones if they will be stained.

Tadas

Pat

Would you happen to sell that first wooden vent on the page? Our house came with them, and one broke, and it’s been hard finding a replacement. It looks to be the same with the five slats on either side. I measured mine at 11.25″ by 5″.

Thanks for your time!

Hi Pat,

We don’t sell them on their own sorry, but if you search “wood Flush Mount with Frame vents” online, it will come up with some companies that do. You can get custom sized ones for a exact match too.

Tadas

I have an opening for a vent that is 10 1/8″ X 8 1/2″. White oak. What would it cost for you to make a flush vent?

Hi Scott,

We don’t make vents, but you can find them easily online and they can be custom made to any size you need. One company is American Wood Vents.

Tadas

I would like to limit the amount of heat coming in through a couple of these vents What would you recommend?

Hi Diane,

You can get vents with built in dampers that you can open and close to allow as much airflow and heat as you want. They come in a variety of sizes, so you should be able to find ones to fit your vent openings.

This is a good article about floor dampers and how they work:

https://americanwoodvents.com/learning-center/dampers-air-filter-assembly-options/

They sell vents with dampers too.

Hope that helps.

Tadas

Leave a comment or ask a question...

Your email address will not be published. Required fields are marked *

(Comments are moderated and may take a couple of days to be approved.)

Please answer the question below before submitting your comment:

Back top top
shares